PPG TIMELESS^® Exterior Paint + Primer

Area Preparation

Surface must be clean and dry. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants. Repair all moisture problems. Blistering and peeling issues are commonly caused by moisture behind the paint film. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. When PPG Timeless exterior paint is applied to an uncoated substrate or to bare wood, two coats are required with the first coat acting as the primer. For metal, tannin staining woods, fresh concrete or masonry (less than 30 days cure), or chalky surfaces, use of the appropriate high quality specialty primer is recommended for best results.

Application Details

Stir thoroughly. When using more than one can of the same color, intermix to ensure color uniformity.

Drying Time

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity. To Touch: 30 minutes To Recoat: 4 hours

Coverage

COVERAGE: Approximately 250 to 300 sq. ft. (23.2 to 27.9 sq. meters) per U.S. gallon (3.78 Liters) on primed, smooth, nonporous surfaces.

Cleanup

CLEANUP: Clean brushes and tools with warm, soapy water

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.